您好,欢迎访问山东燊赫通风设备有限公司网站!

服务热线

13210558111

对通风管道破损是需要修复吗?

来源:http://www.jnqsg.com/     发布时间:2022-12-05  

近年来,跟着人们日子水平的不断进步,人们的健康知道越来越高,通风设备走进了办公大楼,成为人们日常日子中必不可少的一部分。通风设备的推动了通风设备技术的开展,使得通风设备的设备技术越来越好。可是,不可防止的,通风管道在设备时会出现破损问题,接下来说明怎样应对通风管道破损问题。
In recent years, with the continuous progress of people's living standards, people's health awareness is getting higher and higher. Ventilation equipment has entered the office building and become an indispensable part of people's daily life. The hot sale of ventilation equipment has promoted the development of ventilation equipment technology, making the equipment technology of ventilation equipment better and better. However, it is inevitable that the ventilation pipe will be damaged when the equipment is installed. Next, we will explain how to deal with the problem of ventilation pipe damage.
如果在管道外就用专用的密封胶就可以修补,管道表面面的铝箔层发生破损,而玻纤保温层未发生损坏,则可选用一片合格的铝箔片进行管道铝箔表面的修补。
If special sealant is used outside the pipe to repair, and the aluminum foil layer on the surface of the pipe is damaged, but the glass fiber insulation layer is not damaged, a qualified aluminum foil can be selected to repair the aluminum foil surface of the pipe.
如果在通风设备设备时发现破损已达到玻纤保温层时,则可将破损的当地切开下来,另选一块无缺的板材,根据切开下来的玻板标准切开好,然后在四周接口上涂上修补胶及粘胶剂,根据工艺标准进行密封,在通风设备正常作业时就要常常检查防止耽搁作业。
If it is found during the ventilation equipment that the damage has reached the glass fiber insulation layer, the damaged area can be cut down, another intact plate can be selected, cut according to the cut glass plate standard, and then apply repair glue and adhesive on the interface around, seal according to the process standard, and often check to prevent delay in the normal operation of the ventilation equipment.
济南通风管道加工
通风管道用途的区分:
Differentiation of ventilation duct use:
1、净化空调系统用风管:镀锌板、不锈钢;(运用中可能出现尘源污染的玻璃钢、复合材料禁用)
1. Air duct for purification air conditioning system: galvanized sheet, stainless steel; (FRP and composite materials that may cause dust source pollution during operation are prohibited)
2、空调系统用风管:镀锌板、彩钢保温板;(通风管道可运用玻璃钢、复合材料)
2. Air duct for central air-conditioning system: galvanized sheet, color steel insulation board; (FRP and composite materials can be used for ventilation ducts)
3、环境操控系统用风管:镀锌板、不锈钢;(可运用塑料、玻璃钢、复合材料)
3. Air duct for environmental control system: galvanized sheet, stainless steel; (Plastic, glass fiber reinforced plastic and composite materials can be used)
4、工业通风系统用风管:钢板、镀锌板;(通风管.可运用塑料、玻璃钢、复合材料)
4. Air duct for industrial ventilation system: steel plate, galvanized plate; (Vent pipe. Plastic, glass fiber reinforced plastic and composite materials can be used)
注:玻璃钢风管可分有机、无机二种,根据设计标准有消防要求的禁用有机质料;
Note: FRP air duct can be divided into organic and inorganic materials. Organic materials with fire protection requirements according to design standards are prohibited;
5、特别运用场合用风管:矿用涂胶布风筒、矿用塑料通风管;(要求阻燃抗静电矿用特性)
5. Air ducts for special applications: rubber coated mine air ducts, plastic mine air ducts; (Flame retardant and anti-static mining safety characteristics are required)

上一篇:不锈钢风管的空气流动要注意些什么?
下一篇:防排烟通风系统怎么设计符合厂房的排烟需求?