未来，型家用排油烟净化器的设计思路应该从风量、风压、噪声、本体阻力和油烟净化效率等5个参数考虑，使之达到佳的搭配。
In the future, the design idea of environmental protection type household lampblack purifier should be considered from 5 parameters, such as air volume, air pressure, noise, bulk resistance and oil fume purification efficiency.
1、在外观上可采用三面封闭的斜面集风设计，低位安装，使油烟机的油烟捕集效率增高，这样也可以采用较小功率的风机。
1, can be used in the appearance of the surface of the three side of the wind collection design, low installation, so that the efficiency of oil fume hood increased, so you can also use a smaller power fan.
2、三面封闭的集气设计，可以防止油烟散逸，增大操作面的控制风速，使油烟顺利而完全地进入油烟机，减少危害；斜面结构设计结合空气动力学原理，使油烟气流产生后快速形成旋流，从吸风口进入油烟分离段分离油气，避免油污进入风机内，使机器内部保持清洁，免除整机拆洗的烦恼。
2, three closed gas gathering design, can prevent the oil smoke dissipated, the operation control of wind speed increases, the oil fume smoothly and fully into the lampblack machine, reduce hazards; slope structure design combined with the principle of aerodynamics, the rapid formation of the oil fume swirl flow generated from the suction inlet, into the smoke separation section of the separation of oil and gas, to avoid the oil into the fan, inside the machine to keep clean, remove the trouble and.
3、根据家庭厨房油烟的物理性质，将油烟分离和抽吸烟气设计为两个独立的系统，前段将油烟中的炭黑颗粒物和雾状油粒子分离出来（如可采用前置离心盘的方法），后段利用抽吸功能将烟气排入室外。
3, according to the physical properties of the family kitchen, the oil fume separation and flue gas suction design for two independent systems, some smoke in carbon black particles and oil mist particles (such as separation method can be used to pre centrifugal disc), using the suction function after the flue gas discharged into the outdoor section.
4、在外表面设计上可采用纳米涂层不沾油材料，以减少油烟机自身被侵蚀和污染。
4, the outer surface of the design can be used nano coating non stick oil material, in order to reduce the lampblack machine itself by erosion and pollution.
