通风管道可以创造舒适的室内空气环境和健康的生活环境，以及室内有害气体和集中的热量和湿度。使用前了解设备的技术要求，使用起来会更方便。下面小编就为大家介绍一下通风管道的主要功能和技术要求！
Ventilation ducts can create a comfortable indoor air environment and a healthy living environment, as well as indoor harmful gases and concentrated heat and humidity. It will be more convenient to understand the technical requirements of the equipment before use. The following editor will introduce the main functions and technical requirements of ventilation ducts!
济南通风管道加工的主要作用是什么？
What is the main function of Jinan ventilation pipe processing?
1、在人口密集地区营造舒适的室内空气环境。在大型、酒店、公共、会议展览等人口密集的地区，对室内环境的要求非常高。借助通风管道，可将新鲜空气导入室内，从而营造舒适的室内空气环境。
1. Create a comfortable indoor air environment in densely populated areas. In densely populated areas such as large shopping malls, hotels, public, conferences and exhibitions, the requirements for indoor environment are very high. With the help of ventilation ducts, fresh air can be introduced indoors, thus creating a comfortable indoor air environment.
2、办公及居住区的健康生活环境。对于上班族来说，办公室和家是日常生活中相对较长的日子。要营造健康的生活环境，通风管道必不可少。出于对人性的关注，很多建筑在施工之初就通风良好。
2. Healthy living environment in office and residential areas. For office workers, office and home are relatively long days in daily life. To create a healthy living environment, ventilation ducts are essential. Out of concern for human nature, many buildings are well ventilated at the beginning of construction.
3、工业厂房区有害气体和集中热湿。在一些工业厂房、生产车间等场所，经常会产生一些有毒、有气味的有害气体，或者散发出大量的热量和水分，给整个车间环境造成不适。通风管道的正确安装会导致工业环境中的不适和健康危害。
3. Harmful gases and concentrated heat and humidity in the industrial plant area. In some industrial plants, production workshops and other places, it often produces some toxic and odorous harmful gases, or emits a lot of heat and moisture, causing discomfort to the entire workshop environment. Proper installation of ventilation ducts will cause discomfort and health hazards in the industrial environment.
What are the technical requirements for the processing of ventilation pipes in Jinan?
1、回风管和保温材料风管不得有水平平缝。这一次，应使用矩形风管。底宽800mm内不得有接头，800-1000mm内只有1个接头，2400mm内不得有2个焊缝。以上所有尺码均禁止水平锁缝。
1. The return air duct and the air duct of thermal insulation materials shall not have horizontal flat joints. This time, rectangular ducts should be used. There shall be no joint within 800mm of bottom width, only one joint within 800-1000mm, and no two welds within 2400mm. Horizontal sewing is forbidden in all the above sizes.
2、组合式净化送风机组送排风组合式机组采用组合式框架板结构，可现场直接安装，外形美观，安装维修方便，漏风率小（当静压单位为1000Pa，漏风率小于1%）。维修板（即外壳）采用双层夹芯板结构，保温性能好，耐腐蚀。
2. Combined purification air supply unit combined air supply and exhaust unit adopts combined frame plate structure, which can be directly installed on site, with beautiful appearance, convenient installation and maintenance, and small air leakage rate (when the static pressure unit is 1000Pa, the air leakage rate is less than 1%). The maintenance board (i.e. shell) adopts double-layer sandwich board structure, which has good thermal insulation performance and corrosion resistance.
3、初、中、滤净化过滤系统分为初、中、滤，可对车间粉尘进行除尘过滤。初效过滤器主要过滤5m尘粒，中效过滤器主要过滤1m尘粒。过滤器采用无隔板过滤器，过滤效率高达99.99%，容尘量大，使用寿命长。
3. The primary, intermediate and filtration purification filtration system is divided into primary, intermediate and filtration, which can remove dust and filter dust in the workshop. The primary efficiency filter mainly filters 5m dust particles, and the medium efficiency filter mainly filters 1m dust particles. The filter adopts a clapboard free filter, with a filtration efficiency of 99.99%, large dust capacity and long service life.
The above is the main functions and technical requirements of the ventilation duct. I hope the above content can be helpful to you. Thank you for your watching and support. Later, we will sort out more information for you. Please pay attention to our website http://www.jnqsg.com to update.
上一篇：分析排烟罩直吸的好还是侧吸的好
下一篇：油烟净化器前面的动态拦截装置起到作用
