专注通风管道加工·排烟罩

保持不锈钢风管表面光滑干净，放在宽阔干燥的隔潮木垫上，堆放整齐。不锈钢板、铝板要里靠在木架上，不要平迭，以防拖拽时划伤表面，开料时应应用不产生刮痕的划线工具。操作时应应用木槌或有橡胶皮套的锤头，不得使用锤子，以防落锤点产生锈迹。

Keep the surface of the stainless steel air duct smooth and clean, place it on a wide and dry damp proof wooden mat, and stack it neatly. Stainless steel and aluminum plates should be leaned against the wooden frame and not stacked flat to prevent scratching the surface during dragging. When cutting, a marking tool that does not produce scratches should be used. When operating, a wooden hammer or a hammer head with a rubber cover should be used, and a hammer should not be used to prevent rust from forming at the drop point.

法兰用材应归类码法放，室外预防要采取防雨、雪对策，降低锈蚀状况。商品应码放在平整无存水，宽敞的场所，码放时应按系统编号，齐整、合理、便于运输。商品搬运装卸应轻拿轻放，以防毁坏成品。

The materials used for flanges should be classified and coded, and outdoor prevention measures should be taken to prevent rain and snow and reduce corrosion. The goods should be placed in a flat, water free, and spacious place. When stacking, they should be numbered according to the system, neat, reasonable, and easy to transport. The handling and loading of goods should be handled with care to prevent damage to the finished product.

还有一点值得注意在上漆时应使漆层匀称，不能有沉积、漏涂、皱褶、气泡及混色等缺陷。不锈钢焊接风管在压口时定先要喷一道防腐漆，确保咬缝内不易锈蚀。板材防腐油漆，根据设计实行。

Another point worth noting is that when painting, the paint layer should be evenly distributed and free from defects such as sedimentation, holidays, wrinkles, bubbles, and color mixing. When welding stainless steel air ducts, a layer of anti-corrosion paint should be sprayed first to ensure that the biting seam is not easily corroded. Board anti-corrosion paint, implemented according to the design.

不锈钢风管是生活当中经常使用的一种设备。挑选品质好的商品对生产很有帮助。所谓风管就是用来运输空气的通风风管系统。随着人们生活水平的提高，人们对生活质量和环境的需求也越来越高。

Stainless steel air duct is a commonly used equipment in daily life. Choosing high-quality products is very helpful for production. The so-called air duct is a ventilation duct system used to transport air. With the improvement of people's living standards, their demand for quality of life and the environment is also increasing.

1.保持钢板表面光滑干净，放在宽阔干燥的防潮木垫架上，堆放整齐。

1. Keep the surface of the steel plate smooth and clean, place it on a wide and dry moisture-proof wooden mat, and stack it neatly.

2.钢板应立在木架上，不得平叠，以免拖动时划伤表面，切割时应使用无划痕的划线工具。操作时应应用木槌或有橡胶皮套的锤头，不得使用锤子，以防落锤点产生锈迹。

2. Steel plates should be erected on wooden frames and not stacked flat to avoid scratching the surface during dragging. Non scratch marking tools should be used during cutting. When operating, a wooden hammer or a hammer head with a rubber cover should be used, and a hammer should not be used to prevent rust from forming at the drop point.

3.法兰用材应归类码放，室外要采取防雨、雪对策，降低锈蚀状况。

3. The materials used for flanges should be classified and stacked, and rain and snow prevention measures should be taken outdoors to reduce corrosion.

4.成品不锈钢风管应堆放在平整无水存放的地方.在宽敞的地方，码放时要按系统编号，整齐整齐，.合理.便于运输。

4. Finished stainless steel air ducts should be stacked in a flat and waterless storage area. In a spacious area, they should be stacked according to the system number, neat, reasonable, and easy to transport.

5.搬运装卸应轻拿轻放，以防毁坏成品。

5. Handling and loading/unloading should be handled with care to prevent damage to the finished product.

上一篇：济南通风管道是工业生产和建筑领域不可缺少的设备
下一篇：纤维织物通风风管的施工方式