在我国的多个场所,尤其是空调的大型场所,通风管道的运用是十分广泛的,它们是进行空气流通,协助空调结束作业的主要零部件。也正是因为如此,咱们在装置空调的时分,都会进行通风管道加工,只需这样,才能够让通风管道与空调相结合。不过在
山东通风管道加工之前,需求留心以下情况。
In many places of our country, especially in large places of central air conditioning, the use of ventilation ducts is very extensive. They are the main parts for air circulation and assisting the completion of air conditioning operations. Because of this, we will process the ventilation duct when installing the air conditioner. Only in this way can we combine the ventilation duct with the air conditioner. However, before the processing of Shandong ventilation pipeline, the following situations should be noted.
其一:规范。
First, norms.
这里所说的规范,就是通风管道的底子规范,咱们所需求的通风管道的尺寸和大小。值得咱们留心的是,在进行规范确认的时分,咱们需求与空调的运用进行联络,只需这样,咱们才能够确保通风管道规范设定之后,能够与空调相互连接,并发挥运用功用,结束它们的运用效果。荆州通风工程
The specifications mentioned here are the basic specifications of ventilation ducts, and the size and size of ventilation ducts we need. What is worth our attention is that we need to contact with the use of air conditioners when confirming the specifications. Only in this way can we ensure that the ventilation ducts can be connected with the air conditioners after the specifications are set, and play their role to end their use effect. Jingzhou Ventilation Project
其二:类型。
The second is type.
通风管道的类型有许多种,不同的类型与空调进行联合运用,所发挥出来的效果也不一样,尤其是保温性的通风管道。所以说,咱们要想进行通风管道加工,且让它们更好的结合空调进行作业,那么,咱们也要在加工之前考虑下它们的类型,这是咱们确保它们gāo效作业,发挥优势效果的好条件。
There are many types of ventilation ducts, and different types of ventilation ducts will have different effects when they are used together with air conditioners, especially thermal insulation ventilation ducts. Therefore, if we want to process ventilation ducts and make them work better with air conditioners, we should also consider their types before processing, which is to ensure that they are ā O Good conditions for effective operation and giving full play to advantages.
此外还需要注意一些事项,比如:
In addition, some matters need to be noted, such as:
通风管道加工的过程中应该尽量避免出现纵向接缝,但是不能出现横向接缝。而且通风管道的咬口缝和四角的缝隙处,需要按照设计洁净等级要求,然后还要采用密封胶将其堵严。另外通风管道板材的连接缝的密封面应该设在通风管道壁的正压侧。
The longitudinal joint shall be avoided as far as possible during the processing of ventilation duct, but the transverse joint shall not be allowed. Moreover, the seaming seams and the four corners of the ventilation pipe shall be sealed with sealant according to the design cleanliness level requirements. In addition, the sealing surface of the joint of the ventilation duct plate should be set at the positive pressure side of the ventilation duct wall.
通风管道加工不能采用S型插条和C型直角插条的连接方式,另外对于一些特殊的通风管道来说,还不能采用按扣式的咬口。
The connection mode of S-shaped and C-shaped right angle inserts cannot be used for the processing of ventilation ducts. In addition, snap joint cannot be used for some special ventilation ducts.
加工的时候,不能在通风管道内部设置加固框或者加固筋,因为这样对于通风管道的质量会造异响。
During processing, reinforcement frame or reinforcement shall not be set inside the ventilation duct, because it will make abnormal noise to the quality of the ventilation duct.
综上情况来说,通风管道加工前,要与空调的底子情况相结合,并要留心通风管道的规范和类型,不同的空调需求不同的通风管道,规范不同,类型也不相同。所以在加工通风管道的时分,需求多考虑以上情况。关注我们
http://www.jnqsg.com,了解更多事项!
To sum up, before processing the ventilation duct, it should be combined with the basic conditions of the air conditioner, and pay attention to the specifications and types of the ventilation duct. Different air conditioners need different ventilation ducts, which have different specifications and types. Therefore, when processing ventilation pipes, more consideration should be given to the above situations. Follow us http://www.jnqsg.com , learn more!
上一篇:餐饮厨房比较常见的五种排烟罩
下一篇:分享油烟净化设备维修指南