专注通风管道加工·排烟罩

事实上，空调通风管道的加工安装是一个非常重要的环节。通风管道的加工和安装有一些具体的要求和规范，是所有个人或企业都应该学习和学习的。那么，通风管道的加工规范有哪些呢？接下来就和小编一起来看看吧。

In fact, the processing and installation of environmental protection air conditioning ventilation duct is a very important link. There are some specific requirements and specifications for the processing and installation of ventilation ducts, which should be learned by all individuals or enterprises. So, what are the processing specifications for ventilation ducts? Next, let's take a look with Xiaobian.

济南通风管道加工规范：

Jinan ventilation pipe processing specification:

规格。这里所说的规格是通风管道的基本规格，以及我们需要的通风管道的尺寸和尺寸。值得注意的是，我们在确定规格时需要与空调的使用相关联。只有这样，才能保证在风管规格设定好后，才能与空调连接，发挥其功能，完成其使用效果。

Specifications. The specifications mentioned here are the basic specifications of the ventilation duct, as well as the size and size of the ventilation duct we need. It is worth noting that the specification needs to be related to the use of air conditioners. Only in this way can it be ensured that after the air duct specification is set, it can be connected with the air conditioner to play its function and complete its use effect.

类型。通风管的种类很多。不同类型与空调配合使用，效果不同，尤其是隔热通风管道。因此，如果我们要对通风管道进行加工，使其更好地与空调配合使用，那么在加工前也应考虑其类型，这是保证其运行并发挥有利作用的良好条件。

Type. There are many kinds of ventilation pipes. Different types have different effects when used with air conditioners, especially the heat insulation ventilation ducts. Therefore, if we want to process the ventilation duct to make it work better with the air conditioner, we should also consider its type before processing, which is a good condition to ensure its efficient operation and play a favorable role.

在加工通风管之前，应结合空调的基本情况，注意通风管的规格和类型。不同的空调需要不同的通风管道、不同的规格、不同的类型。因此，在处理通风管道时，应考虑上述情况。

Before processing the ventilation pipe, pay attention to the specification and type of the ventilation pipe in combination with the basic conditions of the air conditioner. Different air conditioners need different ventilation ducts, different specifications and different types. Therefore, the above situation should be considered when dealing with ventilation ducts.

济南通风管道加工规范：

Jinan ventilation pipe processing specification:

1、加工通风管时，为保证生产后的风管强度，切割时应预留20mm铝箔作为保护边；

1. In order to ensure the strength of the air duct after production, 20mm aluminum foil shall be reserved as the protective edge during cutting;

2、风管在粘接前应进行预组装，并检查接缝是否严密，尺寸是否符合要求。合适的粘合时间取决于季节温度、湿度和粘合性能。粘合后，用正方形检查。钢带。垂直度和对角线偏差的调整应符合规定。

2. The air duct shall be pre assembled before bonding, and check whether the joint is tight and whether the size meets the requirements. The appropriate bonding time depends on the seasonal temperature, humidity and bonding performance. After bonding, check with square. Steel strip. The verticality and diagonal deviation shall be adjusted in accordance with the regulations.

3、通风管道加工时，做好现场板材和预制管道成品的保护工作。

3. During the processing of ventilation pipes, protect the finished products of on-site plates and prefabricated pipes.

4、连接安装后，应检查粘接接头，粘接后应平整、有歪斜。错位。局部裂纹、2mm以上的缝隙等缺陷。

4. After the connection and installation, the bonding joint shall be checked, and the bonding joint shall be flat and skew. Dislocation. Local cracks, cracks above 2mm and other defects.

5、风管支架与吊架的距离应符合规定。

5. The distance between air duct support and hanger shall meet the requirements.

以上就是今天为大家分享的关于问题的相关内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.jnqsg.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.jnqsg.com 。