专注通风管道加工·排烟罩

济南油烟净化器使用一段时间后会进行清洗，但是很多用户发现清洗完成后，油烟净化器的净化效果变差了，而油烟净化器的净化效果是以下三点造成的：

Jinan oil fume purifier will be cleaned after being used for a period of time, but many users find that after cleaning, the purification effect of the oil fume purifier becomes worse, and the purification effect of the oil fume purifier is caused by the following three points:

自身质量问题

Own quality problems

客户使用质量差的净化器时，油烟净化器低压区的板厚很薄。清洗后腐蚀非常严重，导致油烟净化器的电导率、电离能力和吸附能力急剧下降。有一些便宜的。净化器的电极板甚是用镀锌板做的，清洗后直接报废，净化效果很差。

When the customer uses the purifier with poor quality, the plate thickness in the low-pressure area of the fume purifier is very thin. After cleaning, the corrosion is very serious, resulting in a sharp decline in the conductivity, ionization capacity and adsorption capacity of the fume purifier. There are some cheap ones. The electrode plate of the purifier is even made of galvanized plate, which is directly discarded after cleaning, and the purification effect is very poor.

清洁方法

Cleaning method

很多用户在清洗时，清洗方法不正确，导致清洗不彻底，清洗不彻底也会影响净化效果。那么如何判断它是否干净呢？事实上，这很简单。清洗后，检查电场片是否白亮，上面没有油脂。测试时，必须通过光度法检测。如果电极板上的油脂没有清洗干净，会影响电极板的放电和吸附。

When many users are cleaning, the cleaning method is incorrect, resulting in incomplete cleaning. Incomplete cleaning will also affect the purification effect. So how to judge whether it is clean? In fact, it's very simple. After cleaning, check whether the electric field sheet is white and bright, and there is no grease on it. During the test, it must be detected by photometry. If the grease on the electrode plate is not cleaned, the discharge and adsorption of the electrode plate will be affected.

其实很多厂家都会给用户一个外电场来判断电场是否干净或者有没有异物。当然，这种方法对电极片电场密集的情况有效，可以从点火位置判断是否正常工作，但不适用于电场片间距较宽的电场，它对电场非常敏感。低，只有一点点异物是很难点燃的，确实会影响传导。

In fact, many manufacturers will recommend an external electric field to users to judge whether the electric field is clean or whether there are foreign matters. Of course, this method is effective in the case of dense electric fields of electrode sheets. It can judge whether it works normally from the ignition position, but it is not applicable to the electric field with wide spacing of electric field sheets. It is very sensitive to the electric field. Low, only a little foreign matter is difficult to ignite, which will indeed affect the conduction.

如何安装

How to install

事实上，很多用户对济南油烟净化器的了解并不多。油烟净化器清洗后，连上面的撞针都漏了，或者安装不正确，导致油烟释放装置无法工作，那么净化效果如何呢？另外提醒大家，安装油烟净化器的时候一定要选择大，不要因为便宜就在网上买。否则，如果出现问题，您甚可能无法享受基本服务。

In fact, many users do not know much about Jinan lampblack purifier. After the oil fume purifier is cleaned, even the striker on it leaks, or the installation is incorrect, resulting in the failure of the oil fume release device. How about the purification effect? In addition, I would like to remind you that you must choose a big brand when installing the fume purifier, and do not buy it online because it is cheap. Otherwise, if something goes wrong, you may not even be able to enjoy basic services.

要注意油烟净化器的电场在清洗结束后，不要着急地安装回去，一定要对其进行检查，看看油烟净化器的电场是否在清洗的过程中，有没有出现变形，检查拆下来的电场里面有没有杂物，另外就是要时刻注意不要清洗抹布屑、清洗用的钢丝球留在上面。

It should be noted that after the cleaning of the electric field of the oil fume purifier, do not rush to install it back. Be sure to check it to see whether the electric field of the oil fume purifier is deformed during the cleaning process. Check whether there are sundries in the removed electric field. In addition, be careful not to leave cleaning rags and cleaning steel balls on it at all times.

以上就是今天为大家分享的关于问题的相关内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.jnqsg.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.jnqsg.com 。