专注通风管道加工·排烟罩

通风管道如今在整个市场呈现出火热发展的状态，这不仅是因为其自身功能的突出特点，还因为其物美价廉的非常适合推广和普及，所以很受众多厂商的欢迎。以下是讲述通风管道发展火热依靠与自身优势的相关内容。

Ventilation duct is now in a hot development state in the whole market, not only because of its outstanding features of its own functions, but also because its high-quality and low-cost price is very suitable for promotion and popularization, so it is welcomed by many manufacturers. The following is related to the development of ventilation pipeline and its own advantages.

我们都熟悉通风设备。通风管道道是连接风机、空气处理设备和进风口的管道，是通风设备的重要组成部分。设计通风管道道时，应注意通风管道道内的阻力，设应尽量减少阻力。

We are all familiar with ventilation. Ventilation duct is a duct connecting fan, air handling equipment and air inlet, and it is an important part of ventilation equipment. When designing the ventilation duct, attention should be paid to the resistance in the ventilation duct, and the resistance should be reduced as much as possible.

设计通风管道道时，弯头应尽量少，两弯头之间的距离要大一些。当两个弯头之间的距离为管道直径的3倍时，阻力增加约80%。如果是5倍，只会增加30%。

When designing the ventilation duct, the elbows should be as few as possible, and the distance between the two elbows should be larger. When the distance between two elbows is three times the pipe diameter, the resistance increases by about 80%. If it is five times, it will only increase by 30%.

不同含尘气体性质不同，净化应分不同阶段。污染源较多时，可以集中在一个净化系统中，也可以分成几个系统，但污染物的混合会引起燃烧、爆炸的危险、不同的气体温度和湿度、管道中的冷凝、粉尘或混合后气体性质不同，影响回收或净化效率。

The properties of different dusty gases are different, and the purification should be divided into different stages. When there are many pollution sources, they can be concentrated in one purification system or divided into several systems, but the mixing of pollutants will cause the danger of combustion and explosion, different gas temperature and humidity, condensation in the pipeline, dust or different properties of mixed gas, which will affect the recovery or purification efficiency.

在管道处理系统的布置中，要保证整个系统的泄漏损失小，并保证吸入口有足够的风量。

In the layout of the pipeline treatment system, it is necessary to ensure that the leakage loss of the whole system is small and that there is sufficient air volume at the suction inlet.

此外我们在加工通风管道时要真正提高质量，就必须在材料的选择上做好。好的材料可以生产出好的产品，坏的材料不能达到产品的质量。这实际上对我们来说非常关键。加工时，为您选择好的材料以达到好的加工效果是非常有益的。

In addition, if we want to really improve the quality when processing ventilation pipes, we must do a good job in the selection of materials. Good materials can produce good products, and bad materials can not reach the quality of products. This is actually very critical for us. When processing, it is very beneficial to select good materials for you to achieve good processing effect.

济南通风管道加工厂家认为改进通风管道的加工工艺，不同的产品有不同的加工工艺，质量也完全不同。真正提高产品的加工工艺，对我们大有裨益。只要不断提高整体加工工艺，在质量上总能有更好的保障。这方面是我们未来更好地使用我们的产品的保证。这一点你要真正注意，毕竟这真的关系到我们以后的使用。

Jinan ventilation duct processing factory believes that to improve the processing technology of ventilation duct, different products have different processing technology and completely different quality. It is of great benefit to us to really improve the processing technology of products. As long as the overall processing technology is continuously improved, there can always be a better guarantee in quality. This is our guarantee for better use of our products in the future. You should really pay attention to this. After all, it is really related to our future use.

在使用中，学习如何保养和清洁通风管道道，以更好地发挥其作用。实用这应该是很重要的一点，也是客户追求的一点。只有达到项目的效果，客户才能认可我们的产品。更多信息的获取就来我们网站www.jnqsg.com关注吧！

In use, learn how to maintain and clean the ventilation duct to better play its role. Practical, which should be a very important point, but also a point pursued by customers. Only by achieving the effect of the project can customers recognize our products. For more information, please visit our website at www.jnqsg.com Com follow!