说到正压出风口，很多人都有一定的了解。下面就让济南通风管道加工讲解一个问题，正压送风口在什么原因下，需要停止工作呢？
When it comes to positive pressure outlet, many people have a certain understanding. Now let ji 'nan ventilation pipe processing to explain a problem. Under what reason does the positive pressure air supply port need to stop working?
济南通风管道加工的正压送风口通常组装在高层住宅或学校的楼梯和避难所，发生事故时，正压出风口内的电机将进行通风换气。
The positive pressure air supply outlet of Jinan ventilation pipeline processing is usually assembled in the stairs and shelters of high-rise residences or schools. When a safety accident occurs, the motor in the positive pressure air outlet will be ventilated.
当嘴巴张开时，内部温度传感器会提示警报，顶部的宣礼塔会自动打开，可以大力进行排气操作。在排风过程中，如果保证工作温度280度，正压送风口会熔断隔离开关？？，立即阻断气流进入，有效防止火势蔓延新发展趋势。
When the mouth is opened, an internal temperature sensor prompts an alarm, and the minaret at the top opens automatically, allowing for vigorous exhaust operation. In the exhaust process, if the working temperature is 280 degrees, the positive pressure air supply port will fuse the isolation switch. , immediately block air flow to effectively prevent the fire from spreading to the new development trend.
如果正压出风口运行过程中出现一些异常情况，比如电机温度过高，出现异响，一切都不能正常使用。大家应关闭电源，停止操作，并立即检查操作，切记不要再次使用。在维修过程中，不得立即使用，需要经过技术人员测试应用后才能再次使用。
If there are some abnormal conditions in the operation process of the positive pressure outlet, such as the motor temperature is too high, abnormal sound, everything can not be used normally. Everyone should turn off the power, stop the operation, and immediately check the operation, remember not to use again. In the maintenance process, not immediately used, need to be tested by technical personnel after the application can be used again.
济南通风管道加工正压出风口正常运行过程中，要保证供配电系统充足，工作标准电压在相对稳定的条件下运行。不建议使用临时路线，以免造成损失和重大事故。
In the normal operation of the positive pressure outlet of ji 'nan ventilation pipeline processing, it is necessary to ensure that the power supply and distribution system is sufficient and the working standard voltage runs under relatively stable conditions. Temporary routes are not recommended to avoid losses and major safety incidents.
当临时电路损坏或隔离时，需要立即断开开关电源电路，停止使用，用技术配置电路，然后进行操作。使用前请务必阅读相关技术知识，出现紧急问题可立即解决。
When the temporary circuit is damaged or isolated, it is necessary to immediately disconnect the switching power supply circuit, stop using it, configure the circuit with professional technology, and then operate it. Be sure to read the relevant technical knowledge before use. If any emergency problem occurs, it can be solved immediately.
So much for the positive pressure air supply port of Jinan ventilation pipeline processing. If you have any questions about this, let us contact us through the website www.jnqsg.com.
上一篇：济南厨房排烟排不干净是怎么回事？
下一篇：油烟净化器不能正常净化油烟怎么办？
