一般排烟风机系统软件和空调机组的安裝，要在房屋建筑排架结构工程施工完，阻碍物已，路面无脏物的标准下开展。
The installation of general smoke exhaust fan system software and air conditioning unit shall be carried out after the construction of house building bent structure project, the obstacles have been removed and the road surface is free of dirt.
管道不可立即支撑点在含有各种阀门的机器设备上，支撑架或支架应独立设定。管道焊接应坐落于工程施工便捷或地应力小的地区。焊接不可坐落于支撑架处，间距不可低于200mm
The pipe cannot be supported immediately. The support frame or support shall be set independently on the machinery and equipment containing various valves. The pipeline welding shall be located in the area with convenient engineering construction or low in-situ stress. Welding shall not be located at the support frame, and the spacing shall not be less than 200mm
排烟系统通风管道布局的一般标准：
General standards for layout of ventilation ducts of smoke exhaust system:
1.不一样的烟尘汽体具备不一样的特性，因而清洁应在不一样的一部分开展解决。
1. Different soot vapors have different characteristics, so cleaning should be carried out in different parts.
当污染物长期集中化在一个净化设备里时，他们能够分成好多个系统软件。殊不知，空气污染物的混和会造成 点燃、发生爆炸风险及其不一样溫度和环境湿度的汽体。混和后，管道中会出現冷疑、尘土或不一样特性的汽体，危害收购或清洁率。
When pollutants are concentrated in one purification equipment for a long time, they can be divided into many system software. As everyone knows, the mixing of air pollutants will cause ignition, explosion risk and steam with different temperature and environmental humidity. After mixing, cold doubt, dust or steam with different characteristics will appear in the pipeline, endangering the purchase or cleaning efficiency.
通风管道
Ventilation duct
2.管道系统软件合理布局应降低摩擦阻力
2. Reasonable layout of pipeline system software shall reduce friction resistance
一般来说，环形风管抗压强度大，原材料耗费少，但占有室内空间大。矩形框管道占有室内空间小，便于布局，但也必须遵照具体室内空间。
Generally speaking, the annular air duct has high compressive strength and low consumption of raw materials, but it occupies a large indoor space. Rectangular frame pipe occupies a small indoor space and is convenient for layout, but it must also follow the specific indoor space.
3.管道系统软件的铺设标准
3. Laying standard of pipeline system software
管道铺装有二种种类：敞开式和内藏式。维护保养一般选用敞开式安裝。当不可以选用敞开式安裝时，考虑到掩藏安裝方法。管道应尽量成形布局，并沿墙或柱平行面铺设。假如管经很大或隔热保温应建在墙侧。一般状况下，两根管道平行面布局时，间隔不可低于100~200mm
There are two types of pipe pavement: open type and built-in type. Generally, open installation is selected for maintenance. When open installation cannot be selected, the concealed installation method shall be considered. The pipes shall be laid in a shaped layout as far as possible and shall be laid along the parallel plane of the wall or column. If the pipe is large or insulated, it should be built on the side of the wall. Generally, when two pipes are arranged in parallel, the spacing shall not be less than 100 ~ 200mm
上一篇：哪几个方面可以危害到通风管的安裝品质
下一篇：复合风管的战略市场在哪个位置？
