如果长时间使用厨房，砖墙上会形成粘性污渍，难以用去污洗涤剂彻底。有一种方法可以轻松地墙壁上的烟雾。准备洗涤剂，醋，开水，混合三者，搅拌均匀。取一块干净的抹布，浸入混合溶剂中。完全浸泡后，将其取出并拧到半干。用抹布上的溶剂覆盖墙砖上的油渍，窒息一会儿，然后擦拭厨房瓷砖。以这种方式清洗墙壁，油渍很容易去除，值得排烟罩厂家提醒的是，你必须用开水。
If you use the kitchen for a long time, sticky stains will form on the brick wall, which is difficult to remove thoroughly with detergent. There is a way to remove the smoke from the walls easily. Prepare detergent, vinegar, boiling water and mix them well. Take a clean cloth and soak it in a mixture of solvents. After soaking completely, take it out and screw it to half dry. Cover the grease stains on the wall tiles with the solvent on the rag, suffocate for a while, and then wipe the kitchen tiles. Cleaning the walls in this way can remove grease stains easily. It is worth reminding smoke hood manufacturers that you must use boiling water.
排烟罩厂家
Smoke hood manufacturer
对于山东厨房烟雾和餐饮业的厨房来说，排气是否顺畅与厨房能否正常工作直接相关。烟气的净化仅是净化厨房排气系统中的空气的强制性功能。排气系统和净化器的合理匹配是确保烟尘净化器净化效率的关键，也是一个容易忽视烟尘净化器设计的问题。如果排气系统的设计不合理，整个厨房都不会耗尽。即使安装了油烟净化器，烟雾也无法安装油烟净化器。
For the kitchens of Shandong kitchen smoke and catering industry, the smoothness of exhaust is directly related to the normal work of the kitchen. The purification of flue gas is only a compulsory function to purify the air in the kitchen exhaust system. Reasonable matching of exhaust system and purifier is the key to ensure the purifying efficiency of dust purifier, and it is also a problem that is easy to ignore the design of dust purifier. If the exhaust system is not designed properly, the whole kitchen will not be exhausted. Even if the fume purifier is installed, the fume purifier can not be installed.
排烟罩由盖体和盖子的上部和下部组成。盖体由三个平面组成，盖子由前，后，左，右四个平面（或挡板）组成，形成一个圆锥体。锥体的下端与盖体连接，上端与抽油烟机连接，活动挡板在盖体两侧或靠近窗口的盖子上打开，前挡板有凹口美观精致，油烟完全耗尽，污染不污染。环境，山东排烟罩厂家对人体健康有益，结构简单，成本低。
The exhaust hood is composed of a cover body and the upper and lower parts of the cover. The cover body consists of three planes. The cover consists of four planes (or baffles) of front, rear, left and right, forming a cone. The lower end of the cone is connected with the cover body, and the upper end is connected with the hood. The movable baffle is opened on both sides of the cover body or on the cover near the window. The front baffle has a concave and exquisite appearance. The soot is completely exhausted and the pollution is not polluted. Environment, Shandong smoke hood manufacturer is beneficial to human health, simple structure, low cost.
装有洗涤液的水由水泵加压并送到罩子喷射成扇形。来自罩底部的油气在与扇形水面接触的情况下被净化和净化，水被气液分离风扇分离，然后回流。水缸。这是水罩的基本工作原理。水罩有一套完整的污水，水，洗涤液，循环等自动控制系统，操作和使用方便。通过罩净化后的气体脱气率可达到约90％，并且管道不再被污染。由于水雾的隔离效果，罩具有一定的防火功能。
The water containing the washing liquid is pressurized by the pump and injected into the hood to form a fan. Oil and gas from the bottom of the hood are purified and purified in contact with the fan-shaped water surface. Water is separated by a gas-liquid separation fan and then refluxed. Water tank. This is the basic working principle of the water cover. The water cover has a complete set of automatic control systems for sewage, water, washing liquid, circulation, etc. It is easy to operate and use. The degassing rate of the purified gas can reach about 90%, and the pipeline is no longer polluted. Because of the isolation effect of water mist, the cover has certain fire protection function.
The above is the introduction of the smoke hood in Jinan. For more information, click on http://www.jnqsg.com/
上一篇：消防排烟系统出现震动问题怎么解决？
下一篇：排烟风机出现以下两种情况怎么解决？
