您好,欢迎访问山东燊赫通风设备有限公司网站!

服务热线

13210558111

排烟罩采用斜面设计结构的原因

来源:http://www.jnqsg.com/     发布时间:2017-09-07  

  通风管道的作用是使加速空气的循环,帮助室内的空气的循环,降低有害气体和温室气体的浓度的一种基本设施,具有一定的防火性能,在输送有害气体时有一定的抵御性能。

  The ventilation pipe is the role of the accelerating air circulation and help the indoor air circulation, reduce the concentration of harmful gas is a kind of basic facilities and greenhouse gases, has certain fire performance, the performance of the protection in the transport of harmful gases.

  济南排烟罩它的安装位置、高度及出风管的走向的选择好坏,可以直观的影响饭店油烟净化排烟罩的吸油烟效果.要获得较好的吸油烟效果.

  The kitchen fume purification hood, the installation position, height and the selection of the direction of the air outlet pipe can directly affect the smoke absorption effect of the smoke purification hood of the fume hood in the hotel, and better smoke absorption effect can be achieved

  1、油烟净化排烟罩应安装在燃气灶具中心点正上方位置上,其底平面与燃气灶具之间的距离应在650mm-750mm范围内.

  1, smoke purification smoke hood should be installed in the gas cooker center point above the position, and its bottom plane and gas range between the distance should be in the range of 650mm-750mm

  2、尽量不要把油烟净化排烟罩安装在门窗等空气对流较强的位置附近,以免影响吸油烟效果.

  2, try not to smoke purification, smoke hood installed in the doors and windows and other air convection strong position near, so as not to affect the effect of oil smoke

  3、出风管不宜太长,好不要超过2米,而且尽量减少折弯,避免多个90度折弯,否则会影响吸油烟效果.
济南排烟罩生产厂家

  3, the air outlet pipe should not be too long, it is best not to exceed 2 meters, and minimize bending, avoid more than 90 degrees bending, otherwise it will affect the effect of oil smoke

  济南厨房排烟在外观上可选用三面关闭的斜面集风规划,低位装置,使油烟机的油烟捕集功率增高,这样也能够选用较小功率的风机。

  Ji'nan kitchen smoke exhaust in the appearance of three sides can be used to plan the slope of the wind collection, low level device, so that soot hood soot collection power increased, so that you can also choose smaller power fan.

  三面关闭的集气规划,能够防止油烟散逸,增大操作面的操控风速,使油烟顺畅而彻底地进入油烟机,削减损害。

  Gas gathering and planning of three closed surface, to prevent smoke escape, increase the operation control speed, the oil fume smoothly and thoroughly into the lampblack machine, cut damage.

  斜面结构规划结合空气动力学原理,使油烟气流发生后快速构成旋流,从吸风口进入油烟别离段别离油气,防止油污进入风机内,使机器内部保持清洁,革除整机拆洗的烦恼。

  Slope structure planning combined with the principle of aerodynamics, the cyclone oil smoke flow quickly after the occurrence of a suction outlet, from the period of separation of oil and gas into the oil smoke separation, to prevent oil into the fan, inside the machine to keep clean, get rid of the trouble and.

  以上便是济南排烟罩今天的分享,您还满意吗,欢迎关注我们的网站:http://www.jnqsg.com/并且关注我们的产品,我们将为您提供的产品,衷心的愿与您建立合作关系。

  The above is the Ji'nan hood share today, you still satisfied with it, welcome to our website: http://www.jnqsg.com/ and pay attention to our products, we will provide you with excellent products, sincerely wish to establish business relationship with you.

上一篇:油烟净化器风管接驳处的防漏风措施
下一篇:开放式通风管道加工频率的计算